Vs may be greater than 10v so that a maximum intended value of rc produces a 10v maximum control voltage.
0 10v dimming cable length.
Voltage component conductors and size cable length feet dimming voltage component conductors and size cable length feet dimming 12 120v 27 277v 34 347v dc drop cable 10 2g 10 2 conductors plus ground 12 2g 12 2 conductors plus ground 05 5 09 9 11 11 15 15 010v 0 10v dimming drop cable dc supplies power to out of system units.
The question about maximum cable length for analog sensors comes up pretty frequently.
These practices are also recommended to dim fluorescent fixtures fitted with ballasts that have a 0 10vdc dimming input.
As a practical matter many 0 10v dimming control inputs can be operated by replacing the variable control resistor with an electronic switch.
Even as digital interfaces gain popularity sensors with analog interfaces 0 10v 4 20 ma etc still represent the overwhelming majority of continuous position sensors used in industrial applications.
0 10v control is compatible only operating from direct ac line voltage.
If class 1 is desired then actions should be taken to reduce the.
A question came in recently concerning the maximum recommended cable length for analog sensors.
Each analog control output is considered to be a dimmer.
You can alternate the amount of energy the light receives between 0 to 10 volts switching between high levels of bright expansive lighting perfect for working cooking and housework or warm ambient light for relaxing or reading.
Polypropylene 0 007 in color chart number color 1 violet 2 gray outer shield material material no shield.
Light dimmer cable 2 conductor 18 awg bc cmr product description.
When to use 0 10 the most common application is intensity control for led architectural lighting fixtures fitted with a driver that has a 0 10vdc dimming input.
Rc must be adjusted to a value of 0 ohms a direct short to return a 0v control voltage.
Wiring protocol 10v wiring 10v low voltage led ballast connection wiring class 2 class 3 power lvb 2285 lv dimming lighting 5320ue 2285r.
To reduce the risk of interference it s highly recommended that 0 10v and communication wires be run as class 2.
2 meter length x 22awg.
The unit will dim to 5 power level at 0 5v value before turning itself completely off.
0 10v dimming is an effective way to control the energy level of your lights in this case leds.